Sialkot, Pakistan
Worldwide enquiries
Decoration & brand application
The right method.
The right finish.
We select the decoration process around artwork, fabric, quantity, hand feel, durability and target cost—so the result looks intentional and performs correctly.
Precise application. Consistent results.Decoration capabilities
Six ways to apply your identity
Screen printing
Ink is pushed through registered mesh screens directly onto the garment. Best for strong spot colours, specialty inks and repeat production.
- Best on cotton & blends
- Durable solid colours
- Puff, high-density & reflective options
Embroidery
Computer-controlled multi-needle stitching builds a raised, durable logo using colourfast embroidery thread.
- Premium dimensional finish
- Excellent for polos, caps and jackets
- Flat, 3D and appliqué options
DTF printing
Artwork is printed onto PET film, coated with hot-melt powder, cured, then heat-transferred to the garment.
- Detailed full-colour artwork
- Works on many fabric types
- Strong for low-to-mid quantities
DTG printing
Water-based inkjet print is applied directly to a properly pretreated garment and heat cured.
- Soft hand and fine detail
- Ideal for cotton-rich garments
- Efficient for small varied runs
Dye sublimation
Heat turns disperse dye into gas so the design bonds inside polyester fibres rather than sitting on top.
- Unlimited all-over graphics
- No heavy surface layer
- Best for white/light polyester
Woven & printed patches
Jacquard weaving or specialist printing creates a separate branded badge that is sewn or heat applied.
- Sharp brand identity
- Removable or permanent
- Multiple edge and backing options
Selection matters
Artwork, fabric and end use must agree.
A beautiful test print can still fail if the chemistry, heat, stretch or garment construction is unsuitable. We review the complete application before bulk production.
Artwork clean-up & separationFabric compatibilityColour and registrationStretch and wash behaviourPlacement accuracyApproved strike-off
Quick comparison
Choose by product requirement
| Method | Best fabrics | Artwork | Order range | Durability |
|---|---|---|---|---|
| Screen printing | Cotton, blends | Spot colours | Medium–high | Very high |
| Embroidery | Most stable fabrics | Logos / lettering | Low–high | Excellent |
| DTF | Cotton, polyester, blends | Full colour | Low–medium | High |
| DTG | Cotton-rich | Photo/detail | Low | Good–high |
| Sublimation | Light polyester | All-over/full colour | Low–high | Permanent |
| Woven patch | Most garments | Badge artwork | Low–high | Excellent |
Controlled production
From artwork to approved application
Artwork review
Resolution, colours, scale and fabric assessed.
Method selection
Best process recommended for the product.
Colour setup
Pantone targets, threads or ink recipes prepared.
Strike-off
Physical decoration sample produced.
Bulk application
Approved settings repeated in production.
Final check
Placement, finish and adhesion inspected.
Start your project
Send us your artwork
Our team will review scale, colours, fabric compatibility and commercial quantity before recommending the decoration method.
